Microtech EMS


				*S & A Polishing* *Microtech EMS*



	Home \| Who We Are \| S&A Polishing Finished Products \| Microtech EMS \| Contact S & A Polishing \| Price List \| FAQs \| FiTec Designs Product Line \| S&A Polishing/ Powdercoated Pieces

All ECU's come from the factory with a pre programmed base map to suit your particular engine,greatly simpifying the installation & start up process.Once the unit is wired into the vehicle correctly,simply turn the key & the car will start & run well enough to be driven to your closest tuning shop for final tuning.

Another major advantage of the Microtech is it's ability to use the factory engine sensors.No more drilling,tapping,modifying or making special brackets to fit aftermarket sensors.A job that is compulsory with almost all other aftermarket management systems.

And to top it all off,all microtech products are covered by a 12 month material & workmanship warranty in the unlikely case of a problem So whether you are looking for improved performance,better fuel economy or simply the luxury of having a fully adjustable ECU fitted to your vehicle the Microtech will give you all the features you could possibly ask for without the hassle & expense of our competition.

Microtech EMS Product Display

LTX12 $975

The LT12/LTX12 has six injector and six coil drivers, suited for controlling a six-cylinder and up-to a three-rotor rotary in 3D sequential injection and spark mode (up to 12 cyl and 6 rotor in batch/wastespark). Comes configured to use stock coils as the LT12. LTX12 requires purchase of six Bosch coils, except for two-rotor applications.

LTX8 $850

The LT8/LTX8 is the simplest of Microtech's offerings, with four injector and four coil drivers, ideal for running a four-cylinder or two-rotor rotary in 3D sequential injection and spark mode (up to 8 cyl and 4 rotor in batch/wastespark). Comes configured to use stock coils as the LT8. LTX8 requires purchase of four Bosch coils......

All LT's can be fined tuned either by the hand controller or by laptop making the system perfect for the 1st time tuner or the professional racer.

Datalog without a laptop! When a user-configurable RPM and/or boost threshold is exceeded, an ECU with this option will begin to datalog all inputs and outputs until the ECU lowers its RPM and/or boost below those thresholds or for a maximum of 5 minutes. This log can then be downloaded onto the laptop by using the laptop adapter. Now included at no extra cost!

MicroTech Dash Unit $350

The Microtech Dash unit is a handsome way to keep a handle on your car's status without taking your eyes off of the road. The Dash unit proves a tuning interface with its mini switches and bright 2-line display, as well as four ultra-bright LEDs and a pinswitch. The LEDs act as a lighted rev counter (user-adjustable) and as master warning lights, activated by user-definable air temp, water temp, and boost thresholds. The pin switch can be screwed into a race steering wheel or other surface and allows for rapid switching between data readout screens.

MicroTech EMS handset 2 line $125

The Microtech Hand controller is another fully-featured tuning interface for those who don't own a laptop or don't wish to carry theirs around and risk theft or damage. The hand controller has a brighty lit 2-line LCD screen, and provides the tuning interface on the top two lines.

MicroTech EMS provides many other accesories to make your standalone user/tuner friendly.

External 3BAR option $55

External 3BAR sensor $130

Wideband O2 sensor LT12 Series $285

USB to COM cable adapter $60

Coils and Brackets 4cyl $190

Coils and Brackets 6cyl $285

Turbo Timer $105

Plug in Loom adapters $170

AFR meter $1100

For 4 Cylinder Cars or 2 Rotor Engines.

-Includes LT8s ECU, laptop adapter or MicroTech Hand controller $950 shipped

For 6 Cylinder Cars or 3 Rotor Engines.

-Includes LT12s ECU, laptop or MicroTech Hand Controller $1100 shipped

This is a great chance to make incredible power and tuning for the bucks

Prices are subjected to change without notice